How To Remove Vivint Doorbell Camera From Wall? - Smarthome Hut

How To Remove Vivint Doorbell Camera From Wall?

Remove Vivint Doorbell Camera From Wall
Spread The Love

Vivint doorbell cameras are excellent security devices that provide an added level of safety to your home. However, there may come a time when you need to remove the camera from the wall.

For instance, You may be moving to a new home, Home renovation is needed, or you want to reposition the camera to get a better view. Whatever the reason, it’s important to know how to safely remove the Vivint doorbell camera from the wall without causing any damage.

Key Takeaways:

Remove Vivint Doorbell Camera From Wall in a few steps:

  • Turn off your Vivint Doorbell camera system
  • Disconnect the wiring and remove power source.
  • Remove the doorbell camera cover
  • Remove Screws and Wires
  • Remove the Mounting Bracket
  • Reassemble your panel

Remove Vivint Doorbell Camera From Wall in 7 Steps

Arrange Necessary Tools

Before, starting the removal process of your Vivint Doorbell Camera, make sure that you arrange the relevant tools as mentioned below:

  • Philips screwdriver
  • Pair of gloves
  • A tester to ensure 0 Current

Disable Vivint smart home system

The Vivint Doorbell system is quite intelligent and it is Theft-proof. Actually, Vivint Doorbell system connects to sensors that produce an alarm in case the sensors feel touched.

Now, Go to your Vivint app and remove the warning notification which means that you have disabled the Vivint system. You can check the setting in the app and confirm the whole Vivint system has been disabled and removed carefully.

Disable Vivint smart home system

Turn off the Power

Make sure that you remove your doorbell camera from the power source carefully. Remove all the direct wiring from the outlet. Locate the circuit breaker that controls the power to the camera, and turn it off. This will ensure that you can safely remove the camera without the risk of electrocution.


Note: Always set aside your Doorbell’s wiring and connection resources to ensure that no live wire can harm you.

Remove the Panel Cover

First, check the current supply has been stopped and it is not passing through the doorbell because, even after removing the power source, there is a possibility of current. So, you can use a Tester and if tester’s light blinks, it means the current is still passing through.

Now, when you have cleared and ensured that there is no current, take a screwdriver and remove the screws from the panel. Push the tab gently and pull the cover out and down. Hang the panel cover on the backplate.

Remove the Vivint's Panel Cover

Remove the Mounting Bracket

When you have opened the panel cover, you will see two sets of wires. One is used to direct the current to the circuit while the other wire is for batteries.

  1. Power wires are connecting externally.
  2. Battery wires are insulated internally in the doorbell.

Now, you have to remove the external wires connecting to the doorbell. You can use a simple tool such as a screwdriver to remove the power wires from the panel. Don’t forget to remove any cable wiring connecting to the outside internet mediums.

Remove the Mounting Bracket

Here, you can see screws that have tightened the doorbell with the wall. Once, you remove the screws, you can detach the doorbell and mounting plate from the wall.

Remove the screws

Disconnect Power Wires

When you remove the mounting bracket from the wall, you can see wires from the wall which are known as power wires to supply current to the doorbell. Pull out all the wires and save them aside to use again when you re-install the doorbell.

Disconnect Power Wires

Patch the Holes

With the mounting bracket removed, you may be left with holes in your wall. To patch these holes, you’ll need some spackle or putty.

Contact Us

If you need any further assistance regarding your Vivint Doorbell, please contact Vivint.

Enjoy Reading Too:

Frequently Asked Questions

How do I delete my doorbell camera?

  • Go to your doorbell app on your mobile.
  • Find settings from the menu.
  • Click Delete from the settings.
  • Now, your doorbell account will be removed from the app.

Can you delete camera footage on Vivint?

No, camera footage or any activity on Vivint can’t be edited or deleted.

Do I need any special tools to remove the Vivint doorbell camera from the wall?

No, you don’t need any special tools to remove the camera. A screwdriver and wire cutter or pliers should be

What should I do if I accidentally damage the wires while removing the Vivint doorbell camera?

If you accidentally damage the wires, you may need to hire a professional electrician to repair them. Avoid using the camera until the wires are properly repaired to prevent any electrical hazards.

Can I reuse the mounting bracket after removing it from the wall?

Yes, you can reuse the mounting bracket if it’s still in good condition. Make sure to keep it in a safe place until you’re ready to reinstall the camera.

Can I remove the Vivint doorbell camera from the wall without turning off the power supply?

No, it’s essential to turn off the power supply before removing the camera to avoid damaging the device or receiving an electric shock.

What is the Voice alert of the Vivint doorbell camera?

The voice alert feature of the Vivint doorbell camera allows the device to provide an audible notification when someone presses the doorbell or when motion is detected. This notification can be heard inside and outside the home and can be customized to play a pre-recorded or a default message.

For example, when someone presses the doorbell, the device will play a chime sound and say “Someone is at the door.” If a motion is detected, the device will play a different sound and say “Motion detected at the front door.”

Does Vivint Doorbell Camera Record All the Time?

Vivint Doorbell only records when it detects an event such as a visitor passing through and all its recording is saved through cloud storage.

Can I Still Use My Vivint Camera Without Service?

You can use the Vivint camera without the internet. But, if you want to view the Live interface, connect it to the internet.

Does Vivint Remove Equipment?

You can either remove your system yourself or a Smart Home Pro can professionally remove your equipment for you for only $149.

About Author

Muhammad Azam

Originally from Pakistan Azam, the Founder of <a href="" rel="noopener"><strong> </strong></a>has a keen interest in Audio products and has used multiple Audio and sound-related products with almost every version of the headphones and AirPods. Azam has got a <strong>degree in Bachelors in Computer Science</strong> with a specialization in Home Automation and Security having experience of <strong>3 years</strong> in automation, which has allowed him to guide people on what He has learned, observed, and analyzed to solve their problems with tech and automated gadgets. He has done jobs in various companies across Pakistan i,e; <strong>Tech Resolver Ltd</strong> and <strong>Soft Care Ltd</strong>. Now, He has been writing detailed information on every issue and every feature of headphones, Alexa (Echo devices), Home security devices AirPods, or earbuds and also reviewing them for 2 years. You can find him @ <a href="" rel="noopener">Facebook</a> <a href="" rel="noopener">Instagram</a> <a href="" rel="noopener">Twitter</a> More Info <a href="" rel="noopener">About Smarthomehut</a>

Leave a Reply

Your email address will not be published. Required fields are marked *