How To Remove Blink Doorbell

There may come a time when you need to remove your Blink doorbell. Maybe you’re moving out, or new batteries are required or you want to upgrade to a newer model, or a reset to your Blink doorbell is urgent. Whatever the reason, knowing how to remove Blink Doorbell is important.

This guide will take you through the necessary steps to safely and efficiently remove your Blink Doorbell from the bracket.

How To Remove Blink Doorbell | Without Tool Too

Before removing the Blink Doorbell, Turn off the power to the Blink Doorbell by switching off the circuit breaker or unplugging the transformer.

To remove your Blink doorbell from its mounting bracket, you’ll need a small flathead screwdriver or the little device that came with the Blink doorbell that looks like a paperclip. If you don’t have the device that came with the doorbell, a screwdriver will suffice.

Begin by locating the two sets of holes at the bottom of the Blink doorbell. The first set of holes closest to the front of the doorbell is for the microphone and speaker.

so you should not insert your screwdriver in there. Instead, insert your screwdriver all the way to the back of the device and into the second set of holes.

Then, push up and pull out to disengage the clip on the bottom of the Blink doorbell. Pry it out gently, and the device will come loose from the mounting bracket.

Once you’ve removed the Blink doorbell from its bracket, you can change the batteries or perform a factory reset. The little ledge that you can see on the doorbell is what holds it in place, and the clip on the bottom of the device secures it in position.

When you put your screwdriver in, you’re simply peeling away the plastic piece from the mounting bracket to release the doorbell.

To put the Blink doorbell back on its mounting bracket, simply position the device on the bracket and pull down gently until it engages on the ledges. You’ll hear a click when it’s securely in place.

How To Replace Blink Doorbell Batteries

Precautions before removing Blink Doorbell

Before removing your Blink doorbell, it is important to take some precautions to ensure your safety and avoid damaging the device. Here are some precautions to follow: These tips are equally advisable to remove Nest Doorbell or Ring Doorbell.

Turn off power

Before removing the doorbell, make sure to turn off the power supply to the device. This will prevent any electrical shock or damage to the device.

Wear protective gear

Wear protective gloves and goggles to avoid injury from any sharp edges or small parts that may be present on the device.

Disconnect wires

Carefully disconnect the wires from the doorbell. Make sure to note which wires are connected to each terminal so that you can reconnect them correctly later.

Store safely

Store the doorbell and its components in a safe and dry place. Keep it away from moisture, extreme temperatures, and other hazards that could damage the device.

Reasons to remove Blink Doorbell

There are several reasons why you might need to remove Blink Doorbell. 

When You are moving to a new home. You may want to take the device with you to your new residence, or you may need to remove it to ensure that the new homeowner does not have access to your personal data.

Sometimes, the device may malfunction or stop working, and you may need to remove it to troubleshoot or send it for repairs. Additionally, you may want to remove the device if you are no longer in need of its services or have upgraded to a new model.

Enjoy Reading Too:

Frequently Asked Question

How do you remove a Blink outdoor camera from a mount?

Just pull the bottom of the camera while holding the upper part still and you can easily remove a Blink outdoor camera from a mount.

About Author